Proxim ORiNOCO Installationsanleitung PDF herunterladen (Seite 74)

Device Configuration

ORiNOCO® 802.11n Access Points - Software Management Guide 74

Click OK and COMMIT, to save the configured parameters.

The various Filters supported by the AP device are described in the following sections:

• Protocol Filters

• Static MAC Address Filters

• Advanced Filters

• TCP/UDP Port Filters

• Storm Threshold Filters

• Packet Forwarding

5.8.1 Protocol Filters

The Protocol Filter blocks or forwards packets based on the protocols supported by the AP device. Navigate to

CONFIGURATION > Filters > Protocol Filters. The Protocol Filters screen appears.

Filter STP Frames Specifies STP frames on the network. By accepting the STP frames, any loops that occurs

within a network can be avoided.

By default, this feature is disabled. To configure, select Enable or Disable from the drop

down menu.

– If enabled, the STP frames in the system are bridged.

– If disabled, the STP frames encountered on a network are terminated at bridge.

: For AP-800 and AP-8000, this parameter is named as “STP Forward Frame Status”.

Intra BSS Filtering This parameter enables you to prevent the wireless clients within a BSS from exchanging

traffic.

By default, this feature is disabled. To configure, select Enable or Disable from the drop

down menu.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 177 178

Keine Kommentare

Proxim ORiNOCO Installationsanleitung Seite 74