Proxim MP.11 Bedienungsanleitung PDF herunterladen (Seite 20)

Tsunami MP.11and MP.11a Installation and Management

The MP.11/a either obtains its IP address automatically through DHCP or it must be set manually. With

ScanTool, you can find out the current IP address of the MP.11/a and, if necessary, change it so that is

appropriate for your network.

The MP.11/a is shipped with the static IP address 10.0.0.1 configured.

Setting the IP Address Manually

If you want to set the IP address manually:

1. Run ScanTool on a computer connected to the same LAN subnet as the MP.11/a, or directly

connected to the MP.11/a with a cross-over Ethernet cable.

ScanTool scans the subnet for MP.11/a units and displays the units it finds in the main window. The

following figure shows an example of the main window. If necessary, click Rescan to re-scan the

subnet and update the display.

Chapter 3. Management Overview 20

CPN 65755 Issue Date: August 2003

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 120 121

Keine Kommentare

Proxim MP.11 Bedienungsanleitung Seite 20